BENEFITS
Suitable for sticky, hot, abrasive & fragile materials

Up to 500 m³/hr throughput, with speeds up to 1 m/s

Low maintenance, low wear, and long service life

GIRDLE POCKET ELEVATOR

Advanced Vertical Conveying for Demanding Bulk Solids

The IC GP Elevator from International Combustion (India) Limited is a high-efficiency Specially designed vertical conveyor for handling very abrasive bulk solids. engineered for Flexibility for feeding & discharging from either sides, No resistance for scraping naturally less power requirements and absolutely silent

Engineered to Handle Challenging Materials

Designed to handle materials up to 170°C and 200 mm in size, the Girdle Pocket Elevator is ideally suited for:

  • Abrasive loads like coke, clinker, sinter mix, chrome ore, silicon carbide, corundum
  • Temperature-sensitive and soft materials like burnt lime, chemical products, Soft pellets
  • Hot-duty applications in cement, iron & steel, power plants, and fertilizer industries

Technical Construction Overview

  • Tractive Element: Two endless narrow steel cord belt with vulcanised rubber blocks
  • Pocket Design: Pocket made of steel sheets consecutive pockets are connected by a flexible rubber sheet
  • Drive System: Thead Pulley on the top of the system driven by geared motor with intregrated backstop
  • Installation Flexibility: Self-supporting or structure-integrated with optional dust-tight enclosure

Operating Principle

Material is continuously fed into the moving pockets via chute, vibrating feeder, or belt conveyor. The filled pockets travel vertically with no dynamic impact on the structure. Discharge occurs smoothly between the head pulleys onto either side, allowing dual discharge flexibility. The tight sequence of pockets prevents material spillage and ensures accurate material transport with no bed formation.

The Girdle Pocket Elevator is a future-ready conveying solution designed to exceed the limitations of traditional bucket elevators— delivering precise material handling with significantly lower maintenance and operating costs.

Our Team

We are driven by a passionate team of engineers, designers, and industry professionals committed to excellence in every project.

Infrastructure

Our world-class manufacturing and testing facilities enable us to deliver precision-engineered products with unmatched quality assurance.

Certifications

We adhere to the highest standards of quality, environment, and safety certifications to ensure trust and excellence in every product.

GIRDLE POCKET ELEVATOR


Advanced Vertical Conveying for Demanding Bulk Solids


The IC GP Elevator from International Combustion (India) Limited is a high-efficiency Specially designed vertical conveyor for handling very abrasive bulk solids. engineered for Flexibility for feeding & discharging from either sides, No resistance for scraping naturally less power requirements and absolutely silent


Engineered to Handle Challenging Materials


Designed to handle materials up to 170°C and 200 mm in size, the Girdle Pocket Elevator is ideally suited for:


  • Abrasive loads like coke, clinker, sinter mix, chrome ore, silicon carbide, corundum
  • Temperature-sensitive and soft materials like burnt lime, chemical products, Soft pellets
  • Hot-duty applications in cement, iron & steel, power plants, and fertilizer industries

Technical Construction Overview


  • Tractive Element: Two endless narrow steel cord belt with vulcanised rubber blocks
  • Pocket Design: Pocket made of steel sheets consecutive pockets are connected by a flexible rubber sheet
  • Drive System: Thead Pulley on the top of the system driven by geared motor with intregrated backstop
  • Installation Flexibility: Self-supporting or structure-integrated with optional dust-tight enclosure

Operating Principle


Material is continuously fed into the moving pockets via chute, vibrating feeder, or belt conveyor. The filled pockets travel vertically with no dynamic impact on the structure. Discharge occurs smoothly between the head pulleys onto either side, allowing dual discharge flexibility. The tight sequence of pockets prevents material spillage and ensures accurate material transport with no bed formation.


The Girdle Pocket Elevator is a future-ready conveying solution designed to exceed the limitations of traditional bucket elevators— delivering precise material handling with significantly lower maintenance and operating costs.


APPLICATION

Used to extract bulk solids from bins, convey over short distance and feed to downstream process. It can be used on bulk solids with a particle size of up to 100 mm and temperatures of up to 800°C.

APRON FEEDER

The Apron Feeder operates on principle of gravity discharge. Aprons consist of endless pivoted steel humped plates, attached to side bar chains and runs on rollers on both sides. Drive is through shaft mounted geared motor with either constant or variable speed.

Feeder is totally enclosed and provided with connection for dust extraction.


APPLICATION

The Scooping Belt Conveyor is preferably used to handle wet ash. lime, cement, gypsum, ground lime, wood chips, or similar, difficult-to-handle material.

SCOOPING BELT CONVEYER

The Scooping Belt Conveyor moves bulk solids continuously on level and inclined stretches. The webs, or flights, of the corrugated and belt scoop up the material and also prevent the flow-back of fluidising powdered material.

The totally enclosed construction ensures that there is no spillage. Material adhering to the belt and moved beyond the point of discharge, immediately returned by the partitions to the feed side and received back by the upper belt. The housing of the return, and take-up units designed as a scooping trough, serves this purpose.


APPLICATION

The Spiralling Belt Elevator can be used wherever fine-to-coarse-grained bulk solids require to be handled, horizontally and vertically, in a very confined space.

SPIRALLING BELT ELEVATOR

The Spiralling Belt Elevator moves bulk solids continuously through horizontal and vertical stretches with no points of transfer.

Motor speed, material feed, and straight belt run are monitored by safety devices. The elevator is fed horizontally by a continuous conveyor. In the area of transfer, any fine material particles adhering to the belt drop into a scraper conveyor and are fed back as spillage to the main flow by a circuit conveyor.

The vertical handling section consists of the rubber belt with corrugated side walls and "flights'. This vertical section of the elevator can be slewed in the direction of discharge. Slewing through 135°C to either side is possible while moving. A control unit ensures accurate positioning of the belt to the selected point of discharge. The material is discharged from the upper horizontal section.


APPLICATION

xxxxxxxxxxx ssssss ssssss xxxxxx sssss

SLOT BIN EXTRACTOR

This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it.

This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it. This is a dummy copy. Please don’t read it.