Products

Grizzly Screen Feeders

Vibrating Grizzly Screen Feeders

IC Vibrating Grizzly Screen Feeders are fully floating, linear motion units supported on compression springs, and are driven by highly reliable Direct Force Exciters, through drive motor and cardan shaft coupling. Depending on design, certain models are driven by a pair of unbalance motor exciters.

Deep side plates connected by huck bottled cross beams, ensure high rigidity .Wear surface is provided with abrasion resistant liners.

1. Capacities up to 2500 tons per hour.

2. Handling single particle lumps up to 2.5m edge length

3. To withstand high impact loads when installed directly under dump hopper.

4. Sizes up to 3.5m wide & 8.5m long. Larger size4s available on request.

Typical application includes crusher relief operations in mining & quarrying applications. Screening out trash and tramp material such as high capacity screening of moist coal in power plants-without material blockage. Increasing use in road building and civil construction projects for screening of basalt rock, various types of stones and gravel.


Mogensen Vibro Bar Sizers

The Vibro-Barsizer really works because of its effective blockage-free design principle. It separates difficult-to-screen and heavily polluted materials reliably, including bulky and irregularly shaped particles. Very effective with greasy, sticky and wet materials. Textiles, fibres and plastics in the product stream pose no problems.

The linear vibration of the Vibro-Barsizer and the bars fixed at only one end help ensure a fully trouble-free separation. The bar decks are mostly arranged in multiple cascade- like steps.

The material is turned around and opened up as it falls from one step to another. Pegging and blockages are positively avoided.

Driven by two maintenance-free and quiet vibrator motors or Direct Force Exciters the Mogensen Vibro-Barsizer can additionally be equipped with mesh panels to meet special requirements.

Facts & Data

1. Capacity over 1000 m3/h

2. Separations between 10 mm and 150

3. Handling solids and slurries

4. Dust-tight enclosure

5. Maintenance-free operation for long-term continuous duty

6. No blockage and pegging

7. Favourable energy/capacity ratio

Mogensen Bar Sizers

The Mogensen Bar sizer is specially designed for coarse separations and it operates accordingly at high capacity, free from blockage.It works without moving parts and without consuming energy.

The range of separation is between 25 mm to 400 mm. Individual pieces may be 1 m in size and up to 3 t in weight. The quality of separation is astonishingly good in relation to the requirements of coarse screening.

The simple and robust design ensures failure and maintenance free operation, even with difficult sticky materials contaminated with impurities.

It is a simple design with creative technology. The bars diverge and are fixed at one end only. The gap opens up towards the end of the bars in the same direction as the flow of material.

The material - induced bar vibration prevents blockages. The bars are made of a special steel and may be reversed in order to increase operational life.

Facts & Data

1. No power supply required

2. No noise from drive or moving parts

3. No danger of blockage

4. Capacities up to 1500 tph or even more

5. Size of separation between 25 mm to 400 mm

6. Can handle large lumps up to 3 t individual weight

7. Maintenance-free operation

8. Suitable for both mobile and static plants.